Hanger Shot Blasting Machine

Position: Home > Hanger Shot Blasting Machine  >  Tunnel Shot Blasting Machine

Tunnel Shot Blasting Machine

TB type tunnel shot blasting machines are designed for blasting welded constructions, beams, and profiles of different shapes and dimensions. They are especially suitable for shot blasting work pieces

Model Type TB
Price Negotiation
Rating 4.0 /5 based on 28 ratings and reviews
Operation Method Automatic
Brand name Evertech
Place of Origin Qingdao, China
Certification CE, ISO, UL
Process Continuous
Industry Medium/Heavy
Delivery Time Within 12 weeks

Product Description

The machine

Tunnel shot blasting machines are designed for blasting welded constructions, beams, and profiles of different shapes and dimensions. They are especially suitable for shot blasting work pieces of larger lengths. They can operate individually with their own rail or be integrated into an existing transport system. They can also integrate with paint application lines and drying chambers.


Work pieces are hung on hooks on the overhead transporter that transports work pieces through the tunnel part of the machine. On the lateral sides of the tunnel’s shotblasting part, turbines are carefully placed which provide the optimum coating and cleaning of a work piece, despite the fact that the work piece is not rotated in the shot blasting process under a jet of steel shot coming from the turbines. Work pieces pass on through the blow-off chamber in order for the shot blasting agent to be removed from exposed surfaces, finally exiting the machine.

Features

-Shot blast machines suitable for the treatment of products of middle/large sizes handled horizontally or of products middle/small dimensions hung to proper jigs.

-The handling of the work-pieces can be done by couple of hoists, overhead conveyor or driven trolleys at ground level.

-The blast operation is done in one pass on the whole component surface throughout the crossing of the tunnel.

-Downstream the blasting tunnel, it is possible to install manual blasting cabinet for re-touching or blowing /suction cabinet to remove possible residue shot on the work-pieces.

-Tunnel blast machines are very often installed in complete automatic lines of shot-blasting/painting systems.


Typical work pieces treated with shot blasting machine 

-Civil and industrial buildings (sheds, bridges, viaducts, stadiums, warehouses, walkways, platforms, stairs, etc.)

-Agricultural equipments

-Earth moving equipments

-Buildings and road equipments

-Lifting machines

-Bridge crane

-Industrial vehicles

-Truck chassis

-Railway trolleys

-Metal tanks

-Large castings

-Heat-treated parts

Key Parts Introduction

  • Applications

    -Removal of mill and forge scale as well as rust

    -Blasting of steel constructions as pre-treatment before painting

    -Removal of burrs and flashes

    -Increase of surface roughness

    -Removal of moulding sand and residues


  • Blast Chamber

    -Blast chamber liner

    As with all Evertech's blast machines the shot blasting blast chamber liner is manufactured completely from high manganese. High manganese has a property which is hard enough to deal with the shot blasting from 35HRC to more than 60HRC. They are attached from the outside and are easy to replace. When aggressive shot is used, additional lining of high manganese, fully realize the reflection funcation of abrasive and improve the cleaning quality.

    -3 layers sealing curtain

    There are have 3 layers sealing curtain in each of the front and rear sealing chabmer, the sealing curtain adopt vulcanized rubber with sandwiched with spring steel plate.


  • High performance blast wheel

    Lower finishing time

    up to 77% higher blasting power and freeing up of new capacity.

    Low energy consumption

    up to 25% cost savings and fulfillment of important environmental guidelines.

    Low consumption of consumables

    up to 30% cost savings on abrasives and replacement parts.


  • Electrical control cabinet

    -Using Siemens PLC and touch screen

    -Using Delta or BEST converters

    -Use CHINT or Schneider brand low-voltage electrical components

    -Using shot blasting time controller

    -Using ADE aerodynamic components

    -Flow detection ammeter

    -lamp

    -1 set of special constant temperature air conditioning (optional)


ABOUT

Qindao Evertech Sasi (ETSA) Industry Co., Ltd is a high-tech enterprise specializing in the development, manufacturing, sales and after-sales service of auto shot blasting machine, airblast & w···

More >>

CONTACT

ETSA

Mobile/What'sapp/Wechat:

+86 131 8895 5372

info@allblastingtec.com